How Much Does CoolSculpting Cost in Washington DC?

How Much Does CoolSculpting Cost in Washington DC

Do you eat well and make regular trips to the gym but still have a few areas of stubborn fat that you can’t seem to lose. CoolSculpting can treat those troublesome areas for you. CoolSculpting is a fast, safe, fat reduction procedure. However, it’s important to verify the cost of CoolSculpting with an experienced physician, to determine if it’s the right choice for you.

What is CoolSculpting?

CoolSculpting is a non-invasive body contouring treatment that uses controlled cooling to freeze and destroy unwanted fat cells. It is the ideal procedure for men and women wanting to sculpt their body without surgery. CoolSculpting is FDA approved for treating the abdomen, flanks, back fat, thighs, bra fat, fat beneath the buttocks, upper arms, and submental fat (double chin).

How Much Does CoolSculpting Cost in Washington DC?

The cost of CoolSculpting in Washington varies depending on the number of areas being treated, and the applicator being used. CoolSculpting has several handpieces that are designed to fit different body shapes and sizes. Therefore the size and type of the applicator also influences cost.

The cost for CoolSculpting in Washington, DC ranges from $600-$1,200 per area, so treatment will be more expensive when multiple areas are being treated.

Patients considering CoolSculpting should find an experienced provider that understands their aesthetic goals, and can provide a customized treatment plan.

Since CoolSculpting is a cosmetic treatment it is not covered by insurance companies. Patients therefore have to pay for the procedure out-of-pocket, or with the aid of a medical financing plan. Some practices run CoolSculpting promotions or specials to make the procedure more affordable.

Would you like to learn more about CoolSculpting?

If you are in the Washington, DC area, contact Capital Laser & Skin Care, Chevy Chase, MD to learn more about CoolSculpting, and receive an individualized treatment plan.

You can reach them at, or by calling (301) 760-2218.

Should I Get CoolSculpting or DualSculpting?

Should I Get CoolSculpting or DualSculpting?

If you need to reduce unwanted fat and sculpt your body, chances are you already know that CoolSculpting does a wonderful job. It’s the only treatment of its kind, because it uses controlled cooling to freeze away stubborn fat. But DualSculpting is even better, because it uses two CoolSculpting machines to treat different areas at the same time. But should you get CoolSculpting or DualSculpting.

CoolSculpting fat reduction
CoolSculpting is an FDA approved non-invasive treatment for reducing fat bulges in areas such as the abdomen, flanks, thighs, around the bra straps, on the back, below the buttocks, upper arms, and beneath the chin. The cooling panels are applied to the treatment area and freeze the fat, causing it to crystallize and die. CoolSculpting reduces fat by up to 25%. Best of all, there is no downtime, so patients can get back to normal activities right away.

Should you get CoolSculpting or DualSculpting?
CoolSculpting is an excellent non-surgical fat reduction treatment, but it does have a limitation. The machine treats only one area at a time. So if you have one area to treat, such as beneath the chin, you can certainly get CoolSculpting. However, if you are treating multiple areas like the thighs or flanks, DualSculpting is the better option.

DualSculpting saves you hours, because you would only need to book a single treatment to get the flanks treated, whereas you would need to book two CoolSculpting sessions to treat both sides. DualSculpting is therefore more time efficient for treating multiple areas. It’s the same great CoolSculpting technology, only faster.

Do you think CoolSculpting or DualSculpting may be right for you? Search our directory to find a practice in your area.

If you are in the Campbell, Santa Cruz, or Watsonville, CA areas, Trilogy Medical is our featured practice.

You can reach them at, or by calling Campbell (408-844-0010), Santa Cruz (831-600-8117), or Watsonville (831- 724-1164).

CoolSculpting vs. Lipo: How long do results last?

Body contouring has become a popular option for men and women wanting to get rid of stubborn fat bulges. CoolSculpting and liposuction are excellent options for contouring the body by reducing fat in specific areas. In determining which procedure may be best for them people often ask – CoolSculpting vs lipo: How long do results last.

CoolSculpting is a non-invasive fat reduction procedure that sculpts the body by freezing unwanted fat cells. CoolSculpting works using a system of controlled cooling known as cryolipolysis. The system freezes and destroys the fat cells without harming the surrounding skin and tissue. The cells are then naturally eliminated by the body.

Liposuction is a surgical procedure that removes fat with the use of a cannula (small tube). The cannula is used to break up the fat, and is inserted under the skin through a small incision. The loosened fat cells are then suctioned out via a tube attached to the cannula (learn more).

CoolSculpting vs Lipo -How long do the results last?
CoolSculpting and liposuction will both destroy fat cells for good, and those cells will not grow back, so the results gained are long-lasting.

However, it’s important to remember that these are body contouring procedures that are designed to reshape the body. Maintaining a healthy lifestyle will therefore impact the duration of the results. That’s because not all the fat cells are treated, so those that remain will expand if there is significant weight gain.

Are you ready to reshape your body with CoolSculpting or liposuction? Search our directory to find a practice in your area.

If you are in the greater Roseville or Sacramento, CA areas, Dr. Rudy Coscia is our featured board certified plastic surgeon.

You can reach Dr. Coscia at, or by calling (916) 773-5559 for the Granite Bay/Roseville location, and (916) 929-1833 for the office in Sacramento.


Is CoolSculpting worth the cost?


CoolSculpting is an excellent solution for those stubborn areas of fat that you can’t seem to shed with diet and exercise. It is a safe, comfortable, non-invasive fat reduction system that requires minimal downtime. There’s no doubt that it can contour and tone your body, but is CoolSculpting worth the cost?

CoolSculpting body contouring
CoolSculpting is a non-surgical fat reduction procedure that freezes and destroys fat cells below the skin’s surface, to leave you looking sculpted and toned. The CoolSculpting applicator pulls in the skin and fat in the area being targeted, and the area becomes numb after a few minutes.

The procedure takes about 60 minutes, and a massage is done post-treatment to minimize swelling and assist with drainage. The dead, frozen fat cells are eventuallydiscarded by the body, during the normal elimination process.

Is CoolSculpting worth the cost?
The cost of CoolSculpting is not the same for everyone, as it depends on the number of areas that have to be treated. If multiple areas are being sculpted the treatment can range from $2,000-$4,000.But is CoolSculpting worth the price tag?

Some people believe CoolSculpting is worth the cost, because they’ve gotten the sleeker body they desired. However, that is not the case for everyone, as there are other patients that have seen only negligible improvement after one treatment. It’s also important to note that CoolSculpting works best when combined with a healthy diet and regular exercise.

If you’d like to get rid of those troublespots on your body, CoolSculpting may be the right procedure for you. Just be sure to choose an experienced practitioner that knows the technology well.

Clients in Sacramento, CA can contact board certified plastic surgeon Dr. Rudy Coscia.

Call (916) 929-1833 to schedule a consultation.

CoolSculpting vs. SculpSure: Which procedure is better?

If you’ve decided it’s time to get rid of excess fat and sculpt your body,there are now many options on the market that can help you achieve that goal. Foremost among these are CoolSculpting and SculpSure, which are both non-invasive procedures that require no anesthesia, and minimal downtime. But when comparing CoolSculpting vs SculpSure, how do you decide which procedure is better.

CoolSculpting vs SculpSure
CoolSculpting is a fat reducing procedure that uses controlled cooling to freeze and destroy the fat cells. The fat cells are then naturally eliminated from the body.

SculpSure is also a very effective body contouring procedure that uses heat to eliminate fat cells. The system heats the fatty tissues to a temperature between 42-46 degrees Celsius.  A single treatment with SculpSure results in a 24% reduction in the fat layer.

Which procedure is better?
Some physicians consider SculpSure the better treatment, because it produces superior results. SculpSure not only melts the fat cells, it also stimulates collagen. As new collagen develops, the skin takes on a firmer more youthful appearance.

SculpSure is also a more versatile option, because it has 4 applicators, so it can treat several areas of the body at the same time. CoolSculpting can only treat one area per session.

SculpSure saves you time because a single session takes 25 minutes, and typically only one treatment is required. With CoolSculpting you generally need 2-4 treatments, and each session lasts for 60 minutes.

If you have stubborn fat on the abdomen and flanks that you’d like to get rid of, SculpSure may be the right treatment for you.  Clients in Orange County, CA, can contact Song Plastic Surgery, Irvine, CA to find out more.

Call (949) 701-4454 today to schedule a consultation.

What areas are treated by CoolSculpting?

Fat Reduction

CoolSculpting continues to have a high client satisfaction rate; because it is a simple non-surgical way to get rid of unwanted fat that really works. In just one hour you can get measurable fat reduction results using this innovative procedure. But what areas are treated by CoolSculpting, and how many treatments do you need.

CoolSculpting by Zeltiq Aesthetics is a minimally invasive body contouring procedure that freezes fat cells off. This is done using fat reduction technology known as Cryolipolysis.

Cryolipolysis is a method of controlled cooling that targets, freezes, and removes unwanted fat cells, without damaging the surrounding tissues. The changes are seen over several months after treatment, as the frozen fat cells break down, and are naturally eliminated by the body.

Most patients experience an average of 20% fat reduction after one treatment. The procedure is totally non-surgical, so you can return to regular activities after treatment.

What areas are treated by CoolSculpting?
CoolSculpting is not a weight loss solution, but is designed for individuals with localized areas of unwanted fat. It is indicated for use on the abdomen, flanks, and inner and outer thighs. The system also has a smaller applicator that is specially designed to treat the area under the chin.

How many treatments do you need?
The number of treatments needed depend on the extent of the areas being treated, but it generally requires 1-2 sessions.

CoolSculpting is a safe, convenient treatment that is virtually pain-free, and is sure to give you the body contouring results you are looking for.

Contact Nowak Aesthetics, located in Chula Vista CA, to find out if CoolSculpting would be a suitable procedure for you. Call us today at 619-420-1840 to schedule a consultation with Dr. Eugene Nowak.

What is the recovery time for CoolSculpting?

What is the recovery time for CoolSculpting

Do you have areas of fat that simply will not shrink despite all your efforts at dieting and exercise? It may be time to consider CoolSculpting! CoolSculpting is a non-surgicaltreatment that can eliminatestubborn fat for good. But how does it work, and what is the recovery time for Coolsculpting?

CoolSculpting fat reduction
CoolSculpting is a minimally invasive fat reduction procedure.  Fat deposits are reduced using Cyrolipolysis, which is a system of controlled coolingthat targets and freezes fat cells, but does not affect the surrounding tissue. The fat cells eventually die, and are naturally eliminated by the body. CoolSculpting can be used to treat fat on the abdomen, flanks, and the inner and outer thighs.

What to expect
Patients will feel some tugging when the applicators pull the skin into the device at the start of treatment. However, this subsides after a few minutes, and the rest of the treatment is very tolerable.

Most people notice results by about 3 weeks after treatment, as the body slowly eliminates the fat cells. However, final results can take up to 3 months.

What is the recovery time for CoolSculpting?
There is no recovery time after CoolSculpting, so you can resume regular activities after treatment; some patients even go right back to work. There will be some redness in the treated area, but this should last only for a few hours. There may alsobe some tenderness, swelling, and bruising, which may last for up to 2 weeks, but these side-effects should not keep you from going back to your usual routine.

Contact Medicetics Skin Clinic with locations in London and Cirencester, to find out more about CoolSculpting fat reduction. Call today at +44 (0) 207 402 2033 in London, or +44 (0) 330 660 0833 in Cirencester, to book a consultation.

How Long Does the Coolsculpting Procedure Last and How Many Treatments Are Needed?

Coolsculpting is a non-invasive fat reduction procedure that can dramatically improve body contours.  It can eliminate problem areas such as love handles, saddlebags, back fat, and underarm fat. Patients can experience up to 25% fat reduction with Coolsculpting. But how long does the Coolsculpting procedure last, and how many treatments are needed to get these results?

How Coolsculpting works
Coolsculpting uses a system of controlled cooling known as Cyrolipolysis to freeze and destroy fat cells. Cyrolipolysis breaks down the fat cells and in so doing reduces fat. This technique requires no surgery, and there is no downtime.

How long does the Coolsculpting procedure last?
The duration of the Coolsculpting procedure depends on the number of areas being treated, but it typically takes about 1 hour per treatment area. If you are contouring the arms for example, each arm is considered a separate area, therefore the procedure would take about 2 hours. Some doctors have multiple devices, and this allows them to treat different areas simultaneously in less time (learn more).

How many treatments are needed?
It may take anywhere from 2 to 4 Coolsculpting sessions to achieve the circumferential reduction you desire. Some areas may require more than one treatment in order to achieve the targeted reduction.

Most patients notice results within 3 weeks of treatments, and improvements can continue for up to 3 months.

Contact Wisconsin Vein Center & MediSpa, Pewaukee, WI, to find out more about Coolsculpting. Call (262) 746-9088 to schedule a consultation with Dr. Deborah Manjoney. During consultation Dr. Manjoney will determine if you are a good candidate for the procedure, and will also assess how many treatments you will need for optimal results.